Kohler Engine Oil Drain Plug Location With Its Relevant Series - Inside The Yard (2024)

Reading time: 7 min Prefer to listen?

Do you have any idea of the Kohler engine oil drain plug location? The Kohler engine oil drain plug is situated under the oil cooler and close to the engine’s oil filter.

Generally, the Kohler engine oil drain is located in this position in most small engine vehicles. To know more, continue your reading.

Kohler Engine Oil Drain Plug Location In Detail

In different positions, the Kohler engine’s oil plug location can be terminated by manufacturer design according to various models.

But most of the Kohler engine oil drain plug is located under the oil cooler and right below the oil filter. Sometimes, it would be tough to find. In that case, you can jack up or crawl under the car.

The oil drain plug is attached with ½ inch drive and 12-point socket. That is essential to keep it in the correct position with proper balance. Following these instructions, you would easily reach the drain plug of the Kohler engine.

Various Model Kohler Oil Drain Plug Location

There are different models of Kohler engines, and this drain plug location varies in various forms. In that case, there seems to be a little distance between places, but it’s all about the same.

We focus on some specific Kohler engine models with their drain plugs. Let’s check them briefly.

Kohler Engine SeriesOil Drain Plug Location
Kohler 20 HPUnder the right of the oil filter and beneath the engine’s oil cooler
Kohler 7000Behind the engine’s bottom right side
Kohler Command Pro 25Below the oil filter and the engine’s oil cooler

However, let’s know 6 steps to access the Kohler Command oil pressure switch location.

Kohler 20 HP Engine Oil Drain Plug Location

Have ridden a Kohler 20 hp courage engine, but you are still confused about where the oil drain plug is. It’s not hard to find and usually the same as other engine locations.

It’s located under the right of the oil filter and beneath the engine’s oil cooler. It’s attached with a ½-inch drive and a 12-point socket for tightening.

Kohler 7000 Series Oil Drain Plug Location

The Kohler 7000 series oil drain plugs location is the same as other Kohler series. Here, the drain plug is located behind the engine’s bottom right side.

To open this oil drain plug, you need an 11/16-millimeter socket wrench that continues the valve flow of the oil drain plug.

Kohler Command Pro 25 Oil Drain Plug Location

The Kohler Command Pro 25 is the best series in Kohler engine. The oil drain plug is located in the same place as the other series. It’s located under the oil filter and the engine’s oil cooler.

Where Is The Drain Plug Of Kohler Engine Lawn Mower?

In the Kohler engine, you will find the oil drain plug under the lawn mower deck if your machine engages with a lawn mower.

Warning: Clumps of turf or debris can sometimes obstruct the oil drain plug. So, proper maintenance of your machine can keep it in good condition and long-lasting.

A Helpful Tutorial You May Need!

Frequently Asked Questions (FAQs)

Where Is The Oil Drain Plug Located On Kohler Engine?

Most of the Kohler engine has the same location for the drain plug. And it’s right below the oil filter. But in some Kohler models, you can use the oil dipstick (small one) as your oil drain plug.

Can You Change The Oil Drain Plug?

Yes, you can change the oil drain plug if it gets rusted or loose. But make sure to get the exactly compatible size of drain plug otherwise, oil leaking can be your troubleshooting phase.

Conclusion

Hopefully, you get a clear view of the Kohler engine oil drain plug location with different series. Now it’s easy to find the drain plug and check its condition quickly. That will be helpful to get an explicit notification on an oil change. There are no far distances in Kohler

If you are still confused about the drain plug on your Kohler engine machines, take a glance at the table added above.

You Can Also Read:

  • Kohler kt745 Problems With Possible Solutions
  • How To Test Charging System On Kohler Engine | 5 Methods Recommended
  • Are Kohler Engines Good? An In-depth Discussion of the Kohler Engine

Was it helpful?

Thanks for your feedback!

Kohler Engine Oil Drain Plug Location With Its Relevant Series - Inside The Yard (6)

Jack Grover

Enamored with the world of golf Jack pursued a degree in Golf Course Management at THE Ohio State University. This career path allowed him to work on some of the highest profile golf courses in the country! Due to the pandemic, Jack began Inside The Yard as a side hustle that quickly became his main hustle. Since starting the company, Jack has relocated to a homestead in Central Arkansas where he and his wife raise cattle and two little girls.

Kohler Engine Oil Drain Plug Location With Its Relevant Series - Inside The Yard (2024)

FAQs

Where to find oil drain plug? ›

The oil drain plug is right before the transmission on the driver's side of the car. Pop the hood and look for the transmission first. It is one of the biggest components in the engine bay and is usually easy to spot. Then look right in front of it.

Where do you drain engine oil? ›

The oil engine drain plug will be located within 1–2 feet (0.30–0.61 m) of the front of the vehicle, and sits directly beneath the engine. It's on the bottom of a large tank referred to as the oil pan. Slide the drain pan beneath the engine drain plug until it's centered in place.

Which plug is used to drain engine oil? ›

The oil drain plug is located at the lowest point of the oil pan so that the oil contained therein can flow out completely by its own gravity and the entire system thereby emptied independently. The oil drain plug is a screw plug made of metal or plastic. The oil drain plug with sealing ring seals the drain opening.

How many quarts of oil does a Kohler engine take? ›

Fill up to, but not above, the “F” mark on the dipstick. Crankcase capacity is 2.0 quarts (1.9 liters) plus 1/2 pint (0.24 liters) for the new oil filter. IMPORTANT: Check the dipstick reading before adding the last 1/2 pint of oil and fill only to the “F” mark.

What oil does Kohler recommend? ›

*Although 10W-40 engine oil is the recommended oil for most conditions, the oil viscosity may need to be changed to accommodate seasonal temperature changes. Using 20W-50 oil in higher ambient temperatures may reduce oil consumption.

What oil does a 20 hp Kohler engine take? ›

preferred. SAE 10W-30 oil is not recommended above 32°F (0°C). Using this oil substantially increases oil consumption and combustion chamber deposits. NOTE: Using other than service class SG, SH, SJ or higher oil or extending oil change intervals longer than recommended can cause engine damage.

Where does the oil drain plug go? ›

The drain plug is a large nut or plug located under the oil pan at the bottom of the engine. If you can't reach your oil drain plug easily, you'll have to either crawl under your car to reach it or jack up the car.

Do lawn mowers have drain plugs? ›

Step 1: Stop the engine then disconnect the spark plug lead and secure it away from the spark plug. Then, locate the oil drain plug. On mowers, the plug is typically below the deck and may be obscured by a layer of grass and debris.

How much oil does a Kohler engine hold? ›

Crankcase capacity is 2.0 quarts (1.9 liters) plus 1/2 pint (0.24 liters) for the new oil filter.

Top Articles
Latest Posts
Article information

Author: Terrell Hackett

Last Updated:

Views: 5877

Rating: 4.1 / 5 (72 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Terrell Hackett

Birthday: 1992-03-17

Address: Suite 453 459 Gibson Squares, East Adriane, AK 71925-5692

Phone: +21811810803470

Job: Chief Representative

Hobby: Board games, Rock climbing, Ghost hunting, Origami, Kabaddi, Mushroom hunting, Gaming

Introduction: My name is Terrell Hackett, I am a gleaming, brainy, courageous, helpful, healthy, cooperative, graceful person who loves writing and wants to share my knowledge and understanding with you.